METHOD 1: Create a warm, hand-rubbed oil finish. Stir thoroughly. Apply with a natural bristle paintbrush to dark-grained wood that's been sanded and cleaned. Let the oil soak into the surface, and reapply to any spots that look dry. Wipe off the residual oil, rubbing well with clean dry rags to remove all excess.
First, sand the piece down to bare wood, making sure to wear a respirator mask. Seal any exposed end grainâ€”typically the bottoms of chair and dresser feet, which tend to soak up moistureâ€”with a clear penetrating epoxy sealer before applying the stain.
Read this article to find out how to finish outdoor furniture so it will hold up against sun and rain for years to come.
Method 2. Using Sealants to Waterproof. Prepare the surface. You'll need to remove any remaining trace of past finish before using a sealant. Purchase a water-based wood sealer. Apply an even coat. Allow the product to dry. Clean the first coat. Apply a second and third coat. Give the wood time to cure.
Shop our selection of Wood Sealers in the Paint Department at The Home Depot.. Natural Wood Semi Transparent Exterior Waterproofing Deck, Fence and .
Beause of inevitable spills or contact with cold-drink condensation, furniture finishes must provide a good degree of water resistance. As a rule, the more durable .
Many people mistakenly assume that outdoor furniture must be designated as. When working with wood in a gloss or lacquer finish, be sure to sand first to .
Waterproofing Wood Furniture
54 sec read